Hunt for ADSL modem with full IP filtering available in Indonesia

PROLiNK H5004N ADSL Wireless Modem

+ Support default Allow/Deny
* Example:

* Note: On last step (save changes) make sure the selected radio button is at the right position
* ------ Always use subnet mask when using IP address, otherwise the whole rules will be useless

Hurricane 9000G 11b/g Wireless ADSL Router with VPN and Firewall
www.prolink.co.id/products/h9000g.htm
- Support blacklist only
From PDF:
Action When Matched: If any packet matches this filter rule, Forward or Drop this
packet

Barricade™ ADSL Router with built-in ADSL2/2+ Modem Annex A (SMC7901BRA4)
http://www.smc.com/index.cfm?event=downloads.searchResults&localeCode=FR_COD&productCategory=1&partNumber=4315&modelNumber=1689&knowsPartNumber=false&userPartNumber=
+ Support default Allow/Deny

SMC SMC7004VBR Broadband Router
www.smc.com/index.cfm?event=downloads.doSearchCriteria&localeCode=EN_HUN&knowsPartNumber=false&productCategory=1&modelNumber=927&partNumber=0&downloadType=8&os=0
- No IP filtering

AirLive ARM-201
www.airlive.com/support/support_4.jsp?seq=6
- Forward/Next (blacklist) rule only

TP-LINK TD-W8901G

- Forward/Next (blacklist) rule only
- Can we limit access to our forwarding/opened port to certain IP addresses only?
-- Answer from Technival Support via e-mail:
-- I'm sorry to tell you that we do not have any other way to secure your port. And on our device TD-
-- W8901G, it do not have the function to secure the port.

C#: Make Your Application with Trial Version

www.c-sharpcorner.com/UploadFile/tanmayit08/3163/

Read also comments and articles reffered in them

Where N-E-G macro virus is located

C:\Documents and Settings\administrator\Application Data\Microsoft\Excel\XLSTART\N-E-G.XLM

Firmware upgrade for networking device

TFTP Flashing a Belkin F5D7230-4 v1000 or v1444
www.dd-wrt.com/wiki/index.php/TFTP_Flashing_a_Belkin_F5D7230

Note to self:
Unfortunately there's no exact match guide for version currently we own (1213uk)
---

Billion 5112S

Mar 26, 2011:
* no luck so far
* a folk try to update using 5200's firmware..seemed to succeeded but then failed
http://forum.lowyat.net/index.php?showtopic=442555&view=findpost&p=12217511
* another attempt
www.dslreports.com/forum/remark,16378102
(check out reply by ssl2 on 2006-07-16 03:32:36)
---

Word 2003: Merge field format

Issue 1:
Digit grouping are not shown
Solution:
1) Check Control Panel > Regional Setting for correct setup
Example: Digit grouping uses "." (dot)
2) In Word, "Edit" merge field and click "Field Codes"
Add this to the end of field codes: \# ###.###

Access to e-mails from two or more computers

Issue:
Need to have access to all my e-mails from several location (home PC, work PC, etc)

Solution:
Set up one/several location(s) to Leave e-mail copy on server and the one (main computer) that should downloads without leaving copies

Source:
Leave Copy of Email on Email Server
www.basiccomputerinformation.ca/leave-copy-of-email-on-email-server

Problem:
It only works for INCOMING e-mails

Note to self:
"Leave Copy of Email on Email Server" setting on Outlook seems to related with INCOMING, not outgoing messages; has same meaning with "Remove copy from server after retrieving a message" setting on Mac Mail OSX
Source: How do I make sure I leave my messages on the Rogers Yahoo! server?

XP: Cannot print although bunch of printers ARE installed

Office said "No printers are installed"
FoxIt PDF Reader said "Before you can print, you must..."

Solution:
Some AV/security programs might interfere
For example, disabling Comodo Defense+ solves my problem